Got To Home PageGo To Home Page
 Home   Author Guidelines   Review TOS   Sign Up FREE   Submit Articles   Member Login   Computer Guides

WhiteSmoke: Write here. Right now!


English Grammar Writing Software - Whitesmoke takes your writing from simple to sophisticate. Grammar, spelling, and punctuation checks plus a vast dictionary and thesaurus work to improve your texts.

Home | Arts | Graphic

CD DVD Printing - 10 Tips to the Best Looking Disc Your Print Vendor

Want a great looking CD or DVD to help sell your product or get your message out? A good first impression and a strong company image go a long way in achieving success. These ten tips will get you started on creating high-quality, print ready artwork for your next CD or DVD project.

1. Communicate with your CD DVD Printing Vendor

Check with your vendor to see if they have specific instructions for creating and submitting your next CD or DVD duplication and printing order. Communicating with your vendor is the key to getting a great looking DVD or CD without any additional set-up or editing fees. If they do not have specific instructions, then use the tips listed below.

2. High Resolution Artwork - 300dpi or Greater

Create your CD or DVD Artwork in a major graphics program like Adobe Photoshop, Illustrator, InDesign or QuarkXPress. The minimum resolution should be 300dpi (dots per inch) or greater. We recently added a new digital CD / DVD 600 dpi printer, so only artwork that is greater than 300 dpi will take advantage of this new printers capabilities. The better resolution of your artwork, the better your on-disc printing results will be.

3. Use Your Vendor's Template

Use your vendor's templates whenever possible. This will also help with measurements like inner hub or stacking ring diameters and the outer edge bleed. Using your vendor's templates should ensure that your CD/DVD project will move quickly and smoothly into the production phase and eliminate the possibility of additional graphic design fees.

4. Recommend Graphic Formats

TIFF (.tif)
Adobe Photoshop (.psd)
EPS (.eps)
JPEG (.jpg) - usually accepted
PDF (.pdf) - usually accepted

5. Layered Files

Provide your artwork as a layered file. This will help if a minor change like fixing a misspelling is required. If you have guidelines in your art file, make sure they are in a layer so they can be easily removed before the printing process begins.

6. Create Your Artwork in CMYK

Because your vendor will be printing using the CMYK process, please submit your artwork in CMYK mode. If you create your artwork in the RGB color space, it can be converted it to CMYK, but this may cause the colors to shift.

7. Font Size and Selection

Keep your font size no smaller than 7 points, and at least 8 points for reverse type. For smaller type use simpler fonts like Arial, Helvetica or Times New Roman. Elaborate fonts with lots of detail will have the best results at 12 points or higher. Also, provide your vendor with any exotic fonts used in your artwork in case your CD printer does not have them. Outlining your fonts in Adobe Illustrator is another good practice to ensure you get superior results.

8. Send all Original Source Images

Send all of your original source images so the printer can verify the quality. DO NOT USE WEB IMAGES... and never take a low-resolution image and try to increase it to 300 dpi in Photoshop as it will always result in a blurry art file.

Images on your website are compressed to be as small as possible so they load faster in a web browser. Images need to have a lot more information for a quality professionally printed disc than they do for a website. Your web images will appear blurry, pixilated and generally poor-quality if they are used to print your CD or DVD. You should provide the original images before they were compressed for the internet. Lastly, do not stretch small images to make them fit your CD or DVD as this will also cause poor printing output.

9. Safety Margin

Do not put important information such as text or an important part of a photo or graphic up against the crop lines as some may get cut off. Keep your type and other important elements at least 1/8" inside the crop marks. This holds true for both the outer edge of the disc and the inner hub or stacking ring area.

10. Do Not Crop the Center Hub Area

For best results do not crop out your image from the center hub area. Keep in mind that you should keep any important text away from the inner hub safe area.

Follow these 10 tips to get the best results and speed up your CD/DVD project turnaround time.

Article Source: http://bytepowered.org/articles

Kevin Gabrik is an expert in the DVD and CD duplication & printing service and duplicator/printer equipment sales industry over the past 13 years. Get more valuable information by visiting www.techwaredist.com. Read about 5 great tips to selecting the best CD Printers. This article may be freely distributed electronically or in print as long as you leave the article title, author name...

Please Rate this Article

 

Not yet Rated

Click the XML Icon Above to Receive Graphic Articles Via RSS!

Image divider
Copyright � 2006 � bytepowered.org
Terms of Service | Submission Guidelines | Contact Us | Link to Us| Privacy Policy | About Us

Powered by Article Dashboard